E-flite Cessna 182 370 ARF - Manual (Page 23)

23
Wing and Stabilizer Installation
Required Parts
Wing Fuselage
Stabilizer 3mm x 12mm socket head bolt
3mm plastic washer Wing strut (2)
Required Tools and Adhesives
Foam-compatible CA
Ruler
Hex wrench: 3/32"
Phillips screwdriver (small)
 1. Plug the aileron extension into the receiver. Slide
the wing into position and secure it using the
3mm x 12mm socket head bolt and 3mm
plastic washer. Be careful not to over-tighten
the wing bolt.