GBC 2000 Plockmatic Bookmaker - Manual (Page 24)

2. Making Booklets
24
Corner staple
Select [Corner staple] when you want to make corner
stapled sets. Press the [Enter] button to confirm.
Remove either stapler head and position the
other stapler head and clincher as needed. See
section 1. Basics.
note
Finished sets will be delivered to the Trim Bin in the
Trimmer.
Trimming
selecting Trimming On or Off
Press the [+] or [-] button to change Front Trim on or
off. If the cutting margin i.e. the length of the booklet
needs to be adjusted, see Adjusting the Cutting
Margin below. Otherwise, press the [Enter] button to
confirm.
From the Main screen, select Front Trim and press
the [Enter] button.
Adjusting the Cutting Margin
With [Book length] highlighted, press [+] or [-] adjust
the cutting margin. The measurement displayed is
the width of the finished, trimmed booklet. Press the
[Enter] button.
note
Even though it is possible to set a certain cutting
margin in the control panel, the Trimmer has
mechanical limits. The minimum length of a trimmed
booklet is 120 mm (4 /4”) and the maximum length
is 220 mm (8 11/16”).