GBC 2000 Plockmatic Bookmaker - Manual (Page 30)

3.
Admin
0
Mode, safe / fast
Select desired mode and press the [Enter] button.
note
If the Feeder/Collator is set to collating and trimming
is set to on, Fast mode will not increase speed.
Instead select Safe mode to ensure highest booklet
quality.
The Booklet Maker can be set in two different modes,
Safe or Fast. The Safe mode is optimized for highest
booklet quality and the Fast mode is optimized for
highest speed. Select [Mode] and press the [Enter]
button.
Paper size check, continues
Close the Booklet Maker top cover. The message
“Finish set?” will be displayed.
There are now two choices:
Press the [Yes] button on the Booklet Maker. The
set will be finished and fed to the belt stacker.
or
Press the [No] button on the Booklet Maker.
The message “Open cover and remove set”
will be shown in the Booklet Maker control
panel. Open the Booklet Maker top cover and
remove the set. Close the top cover.
•
•
system setup
Scroll to the right system configuration and press the
[Enter] button.
[System Setup] allows you to change how the
booklet making system setup will appear in the
control panel. Select System Setup and press the
[Enter] button.