Advanced receiving operations, Operation from external or extension telephone, For fax/tel mode only – Brother IntelliFAX 1270e User Manual

Page 48: Changing remote codes, To change remote codes, Advanced receiving operations -6, Operation from external or extension telephone -6

Advertising
background image

5 - 6

S E T U P R E C E I V E

Advanced Receiving Operations

Operation from External or Extension Telephone

If you answer a fax call on an extension phone or on an external phone in the EXT.
jack, you can make your fax machine take over by using the Fax Receive Code. When
you press the Fax Receive Code

5 1, the fax machine starts to receive a fax.

(See Easy Receive, page 5-4.)

If the fax machine answers a voice call and double-rings for you to take over, use the
Telephone Answer Code # 5 1 to take the call at an extension phone.
(See Setting F/T Ring Time, page 5-3.)

If you answer a call, and no one is on the line, assume you’re receiving a fax. At the fax
machine phone, press Fax Start, then hang up. At an extension phone, press

5 1,

wait for fax receiving tones (chirps), then hang up. At an external phone, press

5 1 and wait for the phone to be disconnected (the LCD shows

RECEIVE

) before

you hang up. (Your caller will have to press Fax Start to send the fax.)

For FAX/TEL Mode Only

When the fax machine is in FAX/TEL mode, it will use the F/T Ring Time
(double-ringing) to alert you to a voice call. If you’re at the fax machine, you can lift
the handset to answer.

If you’re at an extension phone, you’ll need to lift the handset during the F/T Ring Time,
and then press # 5 1 between the double-rings. If no one is on the line, or if someone
wants to send you a fax, send the call back to the fax machine by pressing

5 1.

Changing Remote Codes

Remote Codes might not work with some telephone systems. The preset Fax Receive
Code is

5 1. The preset Telephone Answer Code is # 5 1.

To Change Remote Codes

1

Press Menu/Set, 2, 4.

2

Press

to select

ON

(or

OFF

), and then press

Menu/Set.

3

If you want to, enter a new Fax Receive Code, and
then press Menu/Set.

4

If you want to, enter a new Telephone Answer
Code, and then press Menu/Set.

5

Press Stop/Exit.

If you are always disconnected when accessing your external TAD remotely, try
changing the Fax Receive Code from

5 1 to # # # and the Telephone Answer Code

from # 5 1 to 9 9 9.

4 . R E M O T E C O D E

or

F A X R E C E I V E :

*

5 1

T E L A N S W E R : # 5 1

Advertising