Brother IntelliFAX 1270e - Manual (Page 51)

S E T U P S E N D 6 - 1
6
Setup Send
Before You Begin
Before you begin sending faxes, make sure you read all the instructions and cautions
for placing originals in the automatic document feeder.
Automatic Document Feeder (ADF)
■
Originals must be between 5.8 and 8.5 inches wide and between 5.9 and 23.7 inches
long. Your fax machine can scan an image only 8.2 inches wide, regardless of the
paper width.
■
Make sure you place the original face down, top edge first in the ADF.
■
Adjust the paper guides to fit the width of your original.
■
The ADF can hold up to 20 pages (17lb -20 lb), feeding each one individually through
the fax machine. Use standard (17 lb –24 lb) paper when using the ADF; if you’re
using heavier paper, feed each sheet individually to prevent paper jams.
■
Make sure originals written with ink are completely dry.
DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric.
You should press Resolution (before you send the fax) to select the resolution for
the type of original you’re sending. (See Resolution, page 6-6.)
Paper guides