Brother IntelliFAX 1270e - Manual (Page 54)

6 - 4 S E T U P S E N D
Cover Page for Next Fax Only
Make sure the Station ID is set up (See Setting Station ID, page 4-1). This feature does
not work without the Station ID.
You can set the fax to send a cover page with a particular original. This cover page
will include the number of pages in your original.
1
Place the original in the ADF.
2
Press Menu/Set, 3, 1.
3
When the LCD shows NEXT FAX ONLY ?, press Menu/Set.
4
Press to select ON .
5
Press Menu/Set.
6
Press to view the comment selections.
7
Press Menu/Set when the LCD shows your
selection.
8
Enter two digits to indicate the number of
pages your are sending. (Enter 0 0 to leave the
number of pages blank.) If you make a
mistake, press
to back up and reenter the
number of pages.
9
Press Menu/Set. The LCD shows:
10
Press 1 if you want to select additional
settings. The LCD returns to the Setup Send
menu—OR—Press 2 if you are finished
choosing settings, and go to Step 11.
11
Enter the fax number you’re calling.
12
Press Fax Start.
Always Send a Cover Page
Make sure Station ID is set up (See Setting Station ID, page 4-1). This feature does not
work without the Station ID.
You can set the fax machine to send a cover page whenever you send a fax. The
number of pages in your fax is not included when you use this setting.
1
Press Menu/Set, 3, 1.
2
Press to select.
3
Press Menu/Set when the LCD shows
COVERPAGE: ON? . (If you select ON , a
coverpage is always sent when you send a fax.)
or
1 . C O M M E N T O F F
4 . C O N F I D E N T I A L
2 . P L E A S E C A L L
3 . U R G E N T
5 . ( U S E R D E F I N E D )
6 . ( U S E R D E F I N E D )
or
O T H E R S E T T I N G S ?
A C C E P T E D
C O V E R P A G E : O F F ?
C O V E R P A G E : O N ?
or