HCO VH400HD User Manual
Page 10
Page | 9
1.
Select TRIGGER MODE
2.
Select Electricity or Normal mode
ILLUMINATION
This feature allows the user to use external lighting (XtendIR-B)
or turn off IR lights if no lights are required in the night. User
selects Internal when they want the IR lights of camera to work
normally; select External if connecting XtendIR-B (sold
separately) to the camera OR to turn lights OFF at night, and
Int + Ext if both the XtendIR-B and camera IR lights are desired.
NOTE: Night image will be black if External is selected without
XtendIR.
1. Select ILLUMINATION
2. Select Internal, External, or Internal + External and
push OK to set
PIR SENSITIVITY
This feature adjusts the PIR motion sensor. Normal will be
used in most settings. If too many false images are occurring,
user can select Low and adjust camera angle and
surroundings. User can select High to increase sensitivity.
1.
Select PIR SENSITIVITY
2.
Select High, Normal, or Low
DUTY TIME
This feature allows the user to program the camera to turn ON
and OFF at a specified time.
1.
Select DUTY TIME
2.
Select Enable to turn ON or Disable to turn OFF
SET START TIME
o
Set camera START time using arrows and push
OK to set
SET STOP TIME