HCO VH400HD User Manual
Page 5
Page | 4
GETTING STARTED
SD MEMORY CARD
The camera supports both SD and SDHC memory cards up to
32 GB.
1. Open camera
2. Insert SD card with marked side facing back of camera
3. Push gently until card clicks into place
4. Push card again to remove
Note 1: Ensure SD card is NOT in locked position.
Note 2: Format SD card in camera before using each time.
This will create a file on the SD card where the camera will
save images onto.
Note 3: It is always recommended to test the SD card by taking
some pictures to ensure SD card works properly before leaving
camera for extended periods of time.
WARNING:
Make sure camera is OFF when adding or
removing SD memory card
BATTERIES
This camera is designed for Lithium/Alkaline or Nickel Metal-
Hydride (NiMH) batteries. An AC to DC power cord (sold
separately) can be attached to the bottom port of the camera.
1. Insert 8 AA batteries while ensuring polarity (+ -) is
correctly orientated.
Note: 6V DC power can be used with or without batteries
inserted. External power by-passes the batteries when 6V
power is connected. Solar panels DO NOT charge batteries
directly located in the camera.
WARNING: Do not use 12V external battery power as camera
damage will occur.