HCO VH400HD - Manual (Page 6)

Page | 5
CHECKING BATTERY LEVEL
Battery level can be seen in bottom left corner of viewer screen
TESTING AND WORKING MODES
The camera has two modes: Setup Mode and Work Mode.
1. Turn switch to middle position to access SETUP mode.
The camera will enter Live Preview Mode automatically. If
the camera beeps, it means either no SD card is inserted
or the SD card is not inserted properly. The SD card needs
to be inserted or reinserted to continue.
2. Turn switch to ON mode. A blue LED light will blink for 5-
10 seconds before the camera is capable of being
triggered by motion.
Note: The LCD screen has a built in sleep mode to save power.
If LCD screen turns off, you must turn camera OFF and back to
SET mode to reset.
MENU OPERATIONS AND SETTINGS
OPERATION SHORTCUT
LIVE PREVIEW
This option allows the user to view in real time what the camera
is capturing. Pictures/videos
can be captured using the “OK”
button while in this mode. This camera is equipped with a Day
Color Mode and Night IR Mode while in Live Preview. It is
recommended to minimize the use of Night IR Mode to avoid
battery depletion.
1. Turn camera to SET mode and LIVE PREVIEW mode
is displayed automatically. If you are already in main
menu, push MENU button to enter LIVE PREVIEW
mode.