HCO VH400HD User Manual
Page 9
Page | 8
VIDEO RESOLUTION
Video mode includes High Definition HD 1280 x 720 or VGA
640 x 480.
1.
Select VIDEO RESOLUTION
2.
Select HD or VGA mode and push OK to set
VIDEO LENGTH
Video length can be set in 1 sec increments from (5s
– 30s).
NOTE: Longer video lengths will deplete battery power and
memory more quickly than lower lengths.
1. Select VIDEO LENGTH
2. Select desired video length and push OK to set
VIDEO SOUND
Video sound recording can be turned ON or OFF.
1. Select VIDEO SOUND
2. Select ON or OFF and push OK to set
QUIET TIME
Also known as, “Time Interval or Delay Time”, this feature puts
the camera to sleep after capturing an image for the selected
period of time before it can be re-activated by motion. Times
vary from 5 seconds to 60 minutes.
1. Select QUIET TIME
2.
Select desired ‘quiet time’ and push OK to set
TRIGGER MODE
This feature allows the user to adjust the trigger speed. Normal
is <1sec trigger speed and requires camera to boot-up upon
detecting motion. Electricity mode keeps the camera ON
continuously (rapidly depletes batteries) and allows for instant
trigger speeds.
NOTE: It is recommended to only use Electricity Mode
when camera is plugged in with AC/DC power adapter.