HCO VH250B - Manual (Page 10)

ENGLISH
Page | 7
CAMERA MODE
This camera can be set to capture still pictures OR video.
1. Highlight “Camera Mode”
2. Push OK or right arrow button
3. Select VIDEO or PHOTO using UP or DOWN arrow
4. Push OK to SAVE setting
PHOTO RESOLUTION (only displayed if PHOTO mode is
selected)
Photo resolution can be set at 8MP, 5MP, 3MP.
1. Highlight “PHOTO RESOLUTION”
2. Push OK or right arrow button
3. Select desired photo resolution
4. Push OK to SAVE setting
PHOTO BURST (only displayed if PHOTO mode is selected)
This feature allows the camera to take from 1-3 photos in rapid
succession following each trigger.
1. Highlight “PHOTO BURST”
2. Push OK or right arrow button
3. Select desired number of photos per trigger
4. Push OK to SAVE setting
Note: First photo may have different exposure than subsequent photos
in burst mode. This camera does a more sophisticated light metering
calculation between the first and second photo, thereby resulting in
slight photo differences.
VIDEO LENGTH (only displayed if VIDEO mode is selected)
Video length can be set in 10 sec increments from 10s – 30s
(VH200B/U250B) or 10 – 60s (U150).
1. Highlight “VIDEO LENGTH”
2. Push OK or right arrow button
3. Select desired video length
4. Push OK to SAVE setting
VIDEO SOUND (only displayed if VIDEO mode is selected)
Video sound recording can be turned ON or OFF.
1. Highlight “VIDEO SOUND”