HCO VH250B - Manual (Page 15)

ENGLISH
Page | 12
TROUBLESHOOTING
1. The camera does not turn ON

Ensure batteries are inserted properly with correct polarity and
fully charged. If possible test each battery with battery tester.
Approximately 1.7V for Lithium, 1.5V for Alkaline, and 1.3V
for Ni-MH.

Ensure SD card is properly inserted and not in locked position.

Reset camera by removing batteries and SD card for 10
minutes.

Cold temperature may decrease battery output sufficiently to
prevent camera from turning ON. Check batteries and ensure
they are rated for cold temperature.
2. Beeping Noise when camera turns ON

Insert SD card.

Ensure SD card is not locked.

Format SD card in camera.

SD card may not be compatible.
3. Camera will not take pictures or stops taking pictures even
with full batteries

SD card is not formatted correctly. Please format SD card in
camera.

Ensure SD card is not locked.

SD card is faulty or incompatible. Please try different SD card
and/or brand. Faulty or incompatible SD cards may cause
system conflict, system crash, and battery drain. Always format
SD card in camera and try different SD cards if problem persists.

Batteries do not have enough power to activate picture/video
sequence.
4. Batteries run down quickly

Avoid poor quality alkaline and rechargeable batteries, avoid
mixing different brands and ages of batteries as battery life will
be adversely affected. Different brands of batteries will perform
differently than others. Please try other battery brands to find
what works best for your environment.

Reduce number of picture burst and/or reduce video length.