HCO VH250B - Manual (Page 14)

ENGLISH
Page | 11
STORAGE
Displays SD memory card USED SPACE and FREE SPACE
FIRMWARE VERSION
Displays the current camera firmware version
ADDITIONAL INFORMATION
TRANSFERRING PICTURES AND VIDEO TO A
COMPUTER:
Pictures and video can be removed in one of two ways:

SD memory card can be removed from camera (ALWAYS
ensure camera is OFF before removing SD card) and transferred
to computer or SD card reader.

Connect camera to computer using supplied USB cable.
1. Turn camera ON
2. Computer will recognize camera and prompt you to
open file or save pictures
FIRMWARE UPDATES
This camera is designed to accommodate future firmware updates if
required.
1. Copy the firmware update file (i.e. Main.elf) onto the SD card
root directory (do not place in any file)
2. Insert SD card into the camera
3. Turn camera to SETUP
4. Select YES and push OK when update prompt appears
5. The blue LED on camera front will blink until the update is
finished.
6. Turn camera OFF and remove one batteries to break
connection after blue LED stops blinking
7. Replace batteries and turn camera to SETUP mode
8. Select NO to update and push OK
9. The update file will be removed from SD card
10. Confirm new firmware version by checking “Camera
Information” (see instructions)