HCO VH250B - Manual (Page 6)

ENGLISH
Page | 3
QUICK START GUIDE
The following will get you up and running quickly. We highly
recommend you read the complete user manual to maximize the use
of your camera.
Factory Default Settings:
Camera Mode: 5MP Photo Burst: 2 Photos
Quite Time: 10 sec PIR Sensitivity: Normal
Temperature: Fahrenheit Power Type: Lithium
Camera Set-up:
1. Install 12 AA batteries (VH200B) or 8 AA (U150/U250B)
(Lithium or Ni-MH) in correct polarity (+/-)
2. Insert SD card into camera with correct orientation (marked
side toward camera front)
3. Turn switch to Setup Mode (middle position)
Setting Date and Time:
1. Turn Camera to Setup Mode (middle switch position)
2. Push up or down arrow to scroll, highlight “Set Date/Time”
and push OK
3. Highlight “Date Format” and/or “Time Format” and push OK
to change the formats
4. Highlight “Set Date/Time” and push OK to change the time
5. Use the up and down arrows to change date and time and the
right and left arrows to move between the date and time.
6. Push OK to save date and time
7. Press Menu button to go back to main menu
MOUNTING CAMERA:
This camera is designed to use the UWAY Bracket (sold separately)
to obtain maximal mounting versatility. Camera can be securely
locked with cable lock (through camera, bracket, or both) or security