HCO VH250B - Manual (Page 13)

ENGLISH
Page | 10
1. Highlight “Access Control”
2. Push OK or right arrow button
SET PASSWORD
Select desired password using ARROWS and push OK to SAVE
DISABLE PASSWORD
Select and push OK to disable password
POWER TYPE
This camera is a precisely tuned instrument. It is recommended to use
Lithium or high quality Ni-MH batteries. Programming which
batteries are present will maximize the cameras potential. This camera
can also be connected to a 6V or 9V (VH200B) external battery pack
(sold separately).
1. Highlight “Battery Type”
2. Push OK or right arrow button
3. Select Lithium, Ni-MH, DC 6V, or DC 9V (VH200B)
4. Push OK to save setting
FORMATTING SD CARD
Formatting the SD card removes all files on the memory card and
prepares it for use in the camera. It is recommended that the SD card
is formatted in the camera prior to each use.
1. Select “Format SD Card”
2. Push OK or right arrow button
3. Select YES to format SD card
4. Push OK to proceed with formatting SD card
CAMERA INFORMATION
The following information is available:
1. Select “Camera Information”
2. Push OK or right arrow button
FILES COUNT
Displays PICTURE and VIDEO number