Kino Flo Wall-O-Lite - Manual (Page 10)

Dimmer level - Lamp response
Sliding the fader on the dimmer board from 0 ~ 100 controls the
number of lamps that are on within a fixture.
Note: the lamps may respond ± 4 channel levels, depending on the
dimmer board.
Wall-O-Lite Lamp
Sequence
DMX Lamp Sequence
Lamp # Dimmer Level
Lamp 2 6
Lamp 2~4 19
Lamp 2~5 32
Lamp 2~6 45
Lamp 2~7 57
Lamp 2~8 69
Lamp 2~9 82
Lamp
2~10
95
Setting the unit to “Individual Lamp” mode allows each lamp position
within the fixture Sequence to have it’s own address. Although this
option will use up a lot of addresses, it may be preferable for certain
situations.
The “Individual Lamp” mode is useful in achieving light effects like
flickering, chasing or creating light patterns.
After the DMX address is entered, the DMX Wall-O-Lite automatically
assigns the next 7 addresses to lamp positions 4 -10. For the sake of
simplification it is advisable to select address sequences such as 1,
10, 20, 30, 40 and so on.
10