Kino Flo Wall-O-Lite - Manual (Page 4)

The gel frame is secured to the fixture by 4 spring-loaded pins. Align the
pins of the gel frame with the oval receptacle holes on the edge of the
fixture. Pull back the pins and release into the receptacles to properly
secure the gel frame.
4
(A) (B)
A) The Gel Frame comes with
Gel Clips. Cut the gel to size and
use the Clips to fasten the gel to
the Frame.
B) Another method is to apply
transfer tape directly to the gel
frame. The clips are not
necessary when taping the gel.
Place the long edge of the Louver with the fixed pins into the Frame. The
fixed pins fit into receptacle holes on each corner of the frame. Align the
upper corners of the Louver to the Frame. Retract the movable pins to
properly seat the Louver. Release the pins to lock in place.