Krell Evolution e Series Manual - Manual (Page 11)

11
Unpacking and Placement
This section describes the procedures for safely unpacking and placing your Evolution e
Series amplifier. The amplifier and accessories are shipped in 1 carton. The dimensions of
the amplifier are shown in the specifications section starting on page 30.
Two people are needed to remove the Evolution e Series amplifier from its shipping box
safely and easily.
Opening the Evolution e Series Amplifier Shipping Carton
1. Open the shipping carton and remove the top layer of foam. The carton contains
these items:
1 Evolution e Series amplifier chassis
1 20 amp AC power cord
1 12 VDC (12 V trigger) cable
1 Packet containing the Quick Setup Guide and the warranty registration card
2. Orient the shipping box so that one person stands at the front of the amplifier and one
person stands at the back of the amplifier. Both people need to grab a pair of the
cardboard handle cutouts (one pair located at the front of the amplifier and one pair
located at the back of the amplifier) and simultaneously lift the amplifier straight up, out
of the carton. Bend and lift with your knees, not your back.
3. Place the amplifier in a safe location, and remove the protective plastic wrapping.
Note
Save all packing materials. If you need to ship the Evolution e Series amplifier in future, repack
the unit in its original packaging to prevent shipping damage.
SECTION
TWO
continued