Krell Evolution e Series Manual - Manual (Page 25)

25
(SECTION THREE: Anatomy of an Evolution e Series Amplifier continued)
Power
7 IEC Power Cord Receptacle
The power receptacle is for use with the provided 20 amp AC power
cord. Use only the power cord supplied with your Evolution e Series
amplifier.
8 Power Breaker Switch
Place this switch in the up position to put the amplifier in stand-by
mode. Place the switch in the down position to turn off the amplifier.
10 Speaker Fuses
The speaker fuse protects the 2250e and 3250e in case of overload or
malfuction.