La Cornue CornuFé 1908 - 36 - Manual (Page 18)

16 Installation and User Guide CornuFé 1908 - 36" - USA / Can
08NOTINSTALFE8/USA-1
Electrical Supply BEFORE DELIVERY
To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage
space located above the surface units should be avoided.
Any element, either an extraction hood or cabinet, situated directly above the range must be made
of non-combustible material and placed at no less than 30" (762 mm) above range.
The recommended height is 36" (914 mm) above range.
May be installed with zero clearance between adjacent combustible construction below the
cooking surface and the back and sides of the appliance.
We recommend a gap of 36½" (927 mm)
or 37" (940 mm) for Canada between units to allow for moving the range.
To be used in conjunction with a suitable ventilation hood.
1.3. Installation
As the oven and the hob are particularly well insulated, the appliance can be built-in without any
need for any special precautions with regard to the surroundings.
However, if the cooker is
installed against a wall, the hottest parts (the strip between 600 and 964 mm. from the floor,
and the surface between the cooktop and the extractor hood) must be protected with a
stainless steel plate or ceramic tiles. La Cornue offers you a wide choice of stainless steel plates
adapted to the size of your stove
Safety: The range, when installed must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the latest edition of the National Electrical Code, ANSI
/ NFPA 70 in the USA and the Canadian Electrical Code, CSA C22.2, in Canada as applicable.
2. E
LECTRICAL
S
UPPLY
Fig. 1
Minimum 30”
Recommended 36”