Nipros LS-800 Operating Instruction - Manual (Page 17)

LS-800
17
Optical Fiber Base Station LS-800
Rear panel
Input the return 3G/HD/SD-SDI signal from a switcher.
( The signal is output from RET HD-SDI OUT 1 connector of LS-700 ).
RET HD/SDI IN 1 connector (BNC)
HD/SDI OUT 1 connectors ( 3 outputs ) (BNC)
Outputs the 3G/HD/SD-SDI signal connected to the HD-SDI IN 1 connector of LS-700.
OPT connector (SMPTE Optical Fiber Cable connector)
Connect to the Optical Fiber Camera Adaptor LS-700 with an optical fiber cable.
AC IN
100/200V(85-240V)
LANC TALLY
OPT
REF. IN HD/SDI OUT 1
PROMPTER/
IN OUT
VIDEO OUT HD-Y/VIDEO
OUT RET1 IN
TC IN
TC OUT
REMOTE
HD/SDI IN1 HD/SDI OUT 2
HD-Y/VIDEO
REF.VIDEO IN RET2 IN
HD-Y/VIDEO
HD/SDI IN2
RET RET
INTERCOM
1 2 1 2 MADE IN JAPAN
AUDIO IN
CA
AUDIO OUT
DC IN
12V(12V-18V)
PGM
2W PROD 2W ENG
INTERCOM 4W
HD/SDI OUT 2 connectors ( 4 outputs ) (BNC)
Outputs the 3G/HD/SD-SDI signal connected to the HD-SDI IN 2 connector of LS-700.
RET HD/SDI IN 2 connector (BNC)
Input the return 3G/HD/SD-SDI signal from a switcher.(output from RET HD-SDI OUT 2 connector of LS-700)