Nipros LS-800 Operating Instruction - Manual (Page 9)

LS-700
09
Optical Fiber Camera Adaptor LS-700
Rear panel
Works when the POWER switch is turned on.
FAN
Connect to the remote connector of a camera.
REMOTE connector (8-pin or 10-pin)
Selects the input signal level, LINE, MIC or P48, according to the signal level input to the AUDIO IN 1/2
connectors.
AUDIO IN 1/2 LINE/MIC/P48 select switch
Outputs the program audio signals from the Base Station LS-800.
Selects the audio output level, LINE or MIC according to the rated input level of the audio equipment
connected to the PGM AUDIO OUT 1/2 connectors.
PGM AUDIO OUT 1/2 LINE/MIC select switch
PGM AUDIO OUT 1/2 connectors (XLR 3-pin, male)
XLR 3-pin,male
1PIN : GND 2PIN : HOT
3PIN : COLD
LINE : When a line-level ( +4 dB ) signal source is connected.
MIC : When a microphone ( -60 dB ) is connected.
P48 : When a phantom microphone ( -60 dB ) which requires DC +48V power is connected.
Rated input level Position
+ 4 dB LINE
- 60dB MIC
Connect with the Li-ion Battery Pack( SONY type ).
V-shoe Battery Holder (Battery Adaptor)