Nipros LS-800 Operating Instruction - Manual (Page 36)

36
1 Connect the TALLY OUT connector of LS-700 to a monitor, etc. with a BNC cable.
TALLY signal connection
PRONPTER/
REF.VIDEO
OUT
RET1/2
HD-Y/
VIDEO
OUT
HD-Y/
VIDEO
IN
LINE
P48
MIC
LINE
MIC
LINE
MIC
AUDIO
IN 1
LINE
P４８
MIC
AUDIO
IN 2
PGM AUDIO
OUT 1
PGM AUDIO
OUT 2
TALLY
OUT
REMOTE
to
monitor,
etc.
(rear panel)
TALLY signal :
5V = Red
3V = Green
0V = OFF
RET1/2
HD-Y/
VIDEO
OUT
TALLY OUT
(BNC)
TALLY signal
LS-700
2 Connect the tally signal from a switcher to the TALLY IN connector with the supplied HD D-sub 15-pin
cable.
In case of multi-camera operation, connect the TALLY OUT connector to the next Base Station LS-800
with the supplied HD D-sub 15-pin cable.
from
switcher or
other LS-800
to
next LS-800
TALLY IN/OUT (HD D-sub 15-pin)
AC IN
100/200V(85-240V)
LANC TALLY
OPT
REF. IN HD/SDI OUT 1
PROMPTER/
IN OUT
VIDEO OUT HD-Y/VIDEO
OUT RET1 IN
TC IN
TC OUT
REMOTE
HD/SDI IN1 HD/SDI OUT 2
HD-Y/VIDEO
REF.VIDEO IN RET2 IN
HD-Y/VIDEO
HD/SDI IN2
RET RET
INTERCOM
1 2 1 2 MADE IN JAPAN
AUDIO IN
CA
AUDIO OUT DC IN
12V(12V-18V)
PGM
2W PROD 2W ENG
INTERCOM 4W
TALLY IN/OUT Connectors
(HD D-sub 15-pin, female)
Pin Assignment
LS-800
TALLY signal
TALLY signal :
short(0V) = ON
open=OFF
Optical Fiber Camera Adaptor LS-700/Optical Fiber Base Station LS-800 LS-700/LS-800
No. Signal Color
1 RED TALLY 1 BLACK
2 RED TALLY 2 BROWN
3 RED TALLY 3 RED
4 RED TALLY 4 ORANGE
5 RED TALLY 5 YELLOW
6 GREEN
7 BLUE
8 PURPLE
9 GRAY
10 COM(GND) WHITE
11 GREEN TALLY 1 PINK
12 GREEN TALLY 2 LIGHT GREEN
13 GREEN TALLY 3 BLACK/WHITE
14 GREEN TALLY 4 BROWN/WHITE
15 GREEN TALLY 5 RED/WHITE