Nipros PS-570 Operating Instruction - Manual (Page 21)

21
PS-270のHD-SDI/SD-SDIコネクタへカメラのHD-SDI/SD-SDI出力からBNCケーブルで接続します。
PS-270のGENLOCKコネクタからカメラのGENLOCK INへBNCケーブルで接続します。
Connect the HD-SDI/ SD-SDI input connector with the HD-SDI output connector of the camcorder
by a BNC cable
HD-SDI/SD-SDI
input connector
In case of using Genlock reference signal,
connect the GENLOCK output connector to the input connector of the camcorder by a BNC cable.
GENLOCK
output connector
6
7
GENLOCK
input connector
HD-SDI/SD-SDI
output connector
PS-270
PS-270
NIPROS PLS−570 System Connection
PS-270のTC IN または TC OUTコネクタとカメラのTC OUT または INコネクタとをBNCケーブルで接続します。
In case of using Time Code (TC) signal,
connect the TC IN or OUT connector with of the camcorder by a BNC cable.
TC IN
connector
8
PS-270
TC OUT
connector
TC OUT
TC IN
TC signal from VTR, etc.
TC signal from Camcorder