Nipros PS-570 Operating Instruction - Manual (Page 36)

36
Specifications
Optical Fiber Camera Adapter PS-270
Output
Time Code BNC x1
BNC x1: 1Vp-p, 75Ω, Anaglog composite or HD-Y ※1
BNC x1: 1Vp-p, 75Ω, self-detecting, dual purpose Genlock/Teleprompter output,
composite or HD-Y (down grade compared to standard HD signal)
Return
Genlock (Prompter)
DC out
Total 50W ※2
XLR 4pin(female) x1: 13.5V 3.5A (Maximum 13.7V, 3.5A)
Mini 4pin(female) x1: DC 8.4V (Maximum 8.7V)or DC12V(Maximum 13.7V)
Monitor Mini 6pin(female) x1: 13.5V 150mA (Maximum 13.7V), for Monitor
Input
DC In XLR 4pin(male) x1: 12V ※3
HD/SD- SDI HD-SDI :1.485Gbps,1.485/1.001Gbps(reclock)
SD-SDI :143Mbps,177Mbps, 270Mbpd,460Mbps, 540Mbps(reclock)
Incom
Incom XLR 4pin(male) x2
MIC2ON mini-jach φ3.5mm
Tally
Tally ramp x3 Front x1 and Backx1 (Both On/Off Selectable), Right side x1
Remote
Remote 8pin ※4
LANC Stereo mini-jack Φ2.5mm
Optical fiber connection
Socket LEMO P/N: EDW.3K93C.TLC
Maximum distance 2km with power supplied from PS570
General
Weight approx. 3.09 lbs. (approx. 1.4 kg)
Dimensions (WxHxD) 7.05 x 2.32 x 10.47 inches (179x59x266 mm)
Power requirement DC 13.5V 20W MAX (when supplied via DC IN)
Power consumption DC operation Maximum: applox. 20W
+32 to 104 F (0℃ to 40℃)
-4 to 140 F (-20℃ to 60℃)
Operating temperature
Storage temperature
※1 : LVM-89W can receive an analog composite only.
※2 : DC output are available only when the power is supplied from PS-570 via an optical fiber cable.
※3 : Connector for DC power in or an incom headset (Auto detecting)
※4 : 8pin for Sony RM-B750 or RM-B150