Reloop MIXAGE CE LTD. - Manual (Page 30)

ENGLISH
30
5. Now start the firmware update tool from the installation CD and open the firmware file that suits
your device.
6. Carry out the firmware update by clicking the „Start“ button.
7. The new firmware will now be transmitted to the device.
8. After a successful update all LEDs of the controller will be lit.
9. After the update has been completed successfully please end the firmware update tool and re-
boot Mixage via the On/Off Button -B41-
10. After a successful update the firmware can be checked again. Please see item 6.1 „Firmware
Check“ under 6. „Updates & Support“.