Understanding of mfp messages, Understanding of mfp messages -17 – Sindoh M612 User Manual

Page 243

Advertising
background image

5-

17

Maintenance and Troubleshooting

5

5. Understanding of MFP Messages

The LCD of the control panel is designed to display the current status and problems. This section describes
messages and how to respond them.

Messages

Meanings

Actions

Invalid Cartridge

No or unsupported cartridge

Reinstall the cartridge. If this message
appears again, replace the cartridge..

Cover Open

The front cover is open.

Close the cover.

[Copy, Scan, Fax]
Cancel Job

This message appears when press-
ing 【 】 or cancel the job in Job
Manager window while copying,
scanning or faxing.

Toner Low

The toner is low

Shake the cartridge to use the remain-
ing toner. Replace the cartridge.

Reference

- If you don’t replace the cartridge,

quality problems can occur. Also,
the machine will stop after printing
a few more sheets.

Replace Toner Car-
tridge

The toner cartridge reaches its life
and should be replaced..

Replace the cartridge with a new one..

Tray Empty

No paper in the designated tray

Load paper in the designated tray.

No Paper:
All Trays

No paper in tray (1-3. Tray, Manual
Tray)

Load paper on Tray

Paper Jam
Paper not fed from
[Tray]

Paper not supplied from Tray(1-3,
Tray, Manual Tray)

Check the paper is in the tray and set
well.

Paper Jam
Paper stops before out-
put tray

Paper jammed inside the machine

Open the front cover and pull out
the cartridge, and then remove the
jammed paper in the paper path.

Advertising