Sindoh M612 - Manual (Page 40)

Preparation for Using the Machine
1-
10
Buttons Functions
Press 【 】 button to start the operation currently set.
The job currently set starts.
Delete the messages(error messages or so) on the display panel.
Try again after removing the jammed paper.
Press 【 】 button to cancel either one of the current jobs - [Printing], [Scanning]
or [Copying] mode.
【 】 Press 【 】 button to switch to the standby window from menu settings.
【 】 Press [ ] button to activate the power saving or maximum power saveing
mode,
and return to the preparation mode if it is in one of power saving mode.
Short press: Power saving mode
Long press(over 2 seconds): Maximum power saving mode.
Processing the following work, the printer power save mode is released. Press
[ ], the power button.
【 A3/11"×17"
START】
Press 【A3/11"×17" START】 button to copy A3/11"×17" or fax A3/11"×17" paper
based on the current function selected. By default, press 【A3/11"×17" START】
button to copy A3/11"×17" paper.
【 PAUSE/REDIAL】 This button works as [PAUSE] function while entering recipient`s FAX numbers
and works as [REDIAL] without any number entered, and you can select any
number from the latest 10 recipient number list.
【 ON-Hook】 Use this button in both transmissions or receptions to dial at [On-Hook] mode
when making a call to a receiver for sending [FAX].
【 RESET】 Used when initializing the settings to the default values.
【 LOGOUT】 Used when logging out the machine after completing the jobs..
【 PROGRAM】 The settings frequently used such as copy, scan, fax functions can be stored in
the memory and later called for the quick use.