SONIQ QV290 - Manual (Page 11)

９
1 Mute and screen display
Mute
The Mute function may be used when you want to receive a call or visitors. When you
need mute, press the “MUTE” button on the remote controller, and the screen will display
the red characters “MUTE”. If you want to restore the sound, press the “ MUTE” button
once more.
Note: Automatic mute is on in program switchover, non-signal in TV and AV mode,
reminding status and during searching.
Screen display
Press the “DISPLAY” button, the screen will have character display to show the current
Channel No., color systems, set time and sleep time. If it is in the screen display mode,
pressing the “DISPLAY” button will cancel the existing screen display.
Pressing the “DISPLAY” button can close the display menu.
Note: 1 Pressing the “DISPLAY” button in AV mode will enable inquiry of current video
status and color systems, set time and sleep time.
2 When the channel is changed, the Program No. is displayed at the right top of the
screen for about 5 seconds.
3. If you want to display the set time and sleep time on the display screen, the set time
and sleep time will be set firstly.
4. If the TV has SAP/STEREO function, it will also be displayed on screen.
2 Selectable picture
Selecting the picture mode
Press the “PP” button to select your desired picture quality.
Press the “PP” button can select one of the five picture modes in turn from
STANDARD, SOFT, VIVID, LIGHT, and PERSONAL.
STANDARD Standard and appropriate picture
SOFT Pale picture
VIVID Light picture
LIGHT Clear and bright, with strong gradation
PERSONAL Picture quality adjusted by your own
Set your desired picture mode
Repeatedly press “MENU” button to show “Picture” menu on the screen, then press
“P+/P-” to select the item you want to adjust, then press “V+/V-” to adjust the effect.
Basic operation: Picture and sound selection
TV Operation