SONIQ QV290 - Manual (Page 13)

１１
5. Select “OFF- TIME” option, then use the Volume Down “V-” button to set hour as 22,
and use “V+” button to set Min. as 30.
6. Select “ON- TIME” option, then use the Volume Down “V-” button to set hour as 07, and
use “V+” button to set Min. as 30.
Note: The last program before turning off the TV is just the one after turning on at the
preset on-time.
★NOTE : In "CLOCK" menu, you must set "TIME" item firstly, then select other items.
★You can preset the designated time by "ALARM" item.
For example: Set "ALARM" as 09:00, when the designated time arrives, there will be
a symbol " " on the screen twinkling continuously and remains until you press any
button on the remote controller or the TV set. When the yellow " " is twinkling and
reminding, the TV will mute. If you have no operation during 10 seconds, the TV will exit
automatically from "CLOCK" time.
Single button hopping
With this function, you can watch the Program No. you were just watching with ease.
Operation method:
In TV mode, press directly the “REVIEW “ button in the TV section of the remote
controller, and you can jump from the current program to the previously watched one
directly.
For example: You were watching Program No. 20, and are now watching Program No. 5.
Now press the “REVIEW “ button, Program No. will jump directly from 5 to 20; then press
it again, Program No. will jump back from 20 to 5. Repeatedly pressing this button will
jump between these two numbers.
Technical operation: Single button hopping and language selection
TV Operation
CLOCK
TIME 18:28
ON-TIME --:--
OFF-TIME --:--
ALARM --:--
BESPOKE TIME --:--
POSITION -
P+/P- : SELECT
V+/V - : ADJUST