SONIQ QV290 - Manual (Page 7)

５
1. Standby Button
It controls power on/standby. Press this button
once, it will exchange between working mode
and standby mode. When TV is in standby mode,
it is in the state of low power consumption and
the screen is unlight. Press the Standby button,
the TV set will working and the indicator will
turns green from red.
2. Mute Button
Press this button to mute the sound. Press it again
or press “V+” to restore the sound.
3. PP Button
There are five models to select: “STANDARD”,
“SOFT”, “VIVID”, “LIGHT” and “PERSONAL”.
Press this button, it can display relevant state of
picture. “PERSONAL” is used for adjusting
brightness, contrast, color etc. by yourself, the
adjusted state will be put automatically into
memory.
4.REVIEW Alternate Program
Press this button once，it can alternate between
the present and previous program.
5. SYSTEM Button
Press the button to switch among the color
systems.
6.DISPLAY Button
Press it once for displaying the present condition.
Press it again for canceling the display
7. Program Number (0-9)
To select a one-digit TV program.，then press the
number button you want.
8. TV/AV Button
Press AV button to receive video signal as VCR or CD video. Press it again to switch to
TV program.
9.-/--/--- Button
To select a two-digit TV program. press the[-/--/---] button, then press the number buttons.
To select a three-digit TV program. press the[-/--/---] button twice, then press the number
buttons.
Names and Functions of Controls
Buttons on remote controller