SONIQ QV290 - Manual (Page 6)

４
The adjusting buttons are in the front of the TV (below the picture tube).
1. Main power switch
2. Volume decrease (V-) and increase (V+)
3. Program number down (P-) and up (P+)
4. Menu button
5. TV/AV button
6. AV IN socket
7. Antenna input and AV IN/OUT
YUV IN S-Video sockets
Video and audio inputs connection:
When you receive DVD and VCD or the output signal of the video and audio of video
machine, directly connect the output lines of the video and audio signal with the relevant
jacks of the back of the TV set.
Note: 1, The rear AV output of the TV is only the signal output in the TV status.
2, If the AUDIO OUT is MONO, the rear AV and the side AV can not be used at
same time.
Names and Functions of Controls
Front of the machine
The functions of adjusting buttons and sockets of AV input