SONIQ QV290 - Manual (Page 12)

１０
PICTURE
BRIGHT 60
CONTRAST 80
COLOR 60
SHARP 50
CORING OFF
BLACK STRETCH ON
llllllllllllllllllllllll. . . . . . . . . .60
P+/P- : SELECT
V+/V- :ADJUST
Output value of every item is average-divided 100 steps: 0~100. After every value of
the "PICTURE" menu has been changed that will be stored. If you do nothing during 10
seconds, the TV will exit automatically from the "PICTURE" menu.
Note: When the color system of the TV is AUTO and input signal is NTSC system or is
forced into NTSC system and the picture is color, the item of TINT will display on the
screen, in other situations, there is no item of TINT . The adjusting range of TINT is
-50
～
+50, and the adjusting range of other items are 0
～
100.
The display of PICTURE menu is as follows:
With this function, you can watch the preset program or place the TV set in
standby mode at set time.
For example, it is 18:28 now, and you want to watch News Program at 19: 00
(Supposing the Program No. is 6), and turn it off at 22:30 (standby); then turn it on at 7:30
the next morning (supposing the Program No. is 12). The operation is as follows:
1. Repeatedly press “MENU” button to enter “CLOCK” menu.
2. Press Program No. Up/Down (P+/P-) button, select “TIME” option (The characters
"TIME" turn into red), then use the Volume Down “V-” button to set hour at 18, and use
“V+” button to set Min. at 28.
Now, the characters selected on the screen will be in red.
3. Select “BESPOKE
TIME
” option, then use the Volume Down “V-” button to set hour as
19, and use “V+” button to set Min. as 00.
4. Select “POSITION” option, then use the Volume Up/Down (V+/V-) button to set the
Program No. as 6.
Basic operation: Setting time
TV Operation
CLOCK
TIME 18:28
ON-TIME --:--
OFF-TIME --:--
ALARM --:--
BESPOKE TIME --:--
POSITION -
P+/P- : SELECT
V+/V - : ADJUST