Sound Devices 970 - Manual (Page 13)

970 User Guide
7
Menu & N
avig
ation
4. Press the Control knob to edit the highlighted parameter.
5. Rotate the Control knob to adjust the value or setting. If editing Track Names, use the the on-
screen keyboard or attached USB keyboard.
6. Press the Control knob to save the new setting. The highlighter will become blue and once
again highlight the entire track.
LCD
From the Main View, press the LCD Button to quickly switch between banks of meters (8, 16, or 32
depending on the value of [Audio - Audio Screen Meters]). When the Main View is not displayed,
press the LCD Button to return to the Main View. Press and hold the LCD Button for two seconds to
turn off the LCD; press again to turn on.
Press LCD Button + Control knob to display the LCD Control Panel. The LCD Control Panel pro-
vides adjustments to the LCD backlight and button backlight. The parameter with the orange slider
bar is the selected parameter. To toggle through the parameters press the Control knob. To adjust the
setting, turn the Control knob. Press LCD again to exit the LCD Control Panel.
Menu
Press the MENU Button (keyboard: F1) to enter the Setup Menu. Most settings of the 970 are ac-
cessed and changed from the Setup Menu. Navigate between menu items by turning the Control
knob. Select menu items by pressing the Control knob. When in a menu, press the MENU Button to
go back to the previous screen.
The Setup Menu is not accessible when in Record or Playback. If the Setup Menu is open when record or
playback is engaged, the Setup Menu will close and return to the Main View.