Sound Devices 970 - Manual (Page 58)

970 User Guide
v. 2.10 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
52
Se
tup Menu Op
tions
# Parameter Name Description Options
12 Phrase List Manager
Enter up to 20 commonly used phrases to create a
“quick” list for adding notes metadata to files.
• Add New Phrase
• Exit
13 Sound Report Info
Create sound reports in a specific folder to a single
drive only or in a current folder for all applicable
drives. Sound reports are comma-delineated CSV files
based on WAV file metadata, but with this parameter,
you can customize the headers for such reports.
CSV files do not appear in the File List.
Options listed here are only those
with pre-defined defaults:
• Date - System Date
• Roll - Reel
• File Type - Current Selection
• Sample Rate - Current Selection
• Frame Rate - Current Selection
• Bit Depth - Current Selection
• Tone Level - Current Selection
14 Erase/Re-format
Format any or all attached drives. When all is se-
lected, all drives will share the same volume label but
each drive name will be suffixed with a unique drive
number.
• Erase/Re-format: Drive 1
• Erase/Re-format: Drive 2
• Erase/Re-format: Drive 3
• Erase/Re-format: Drive 4
• Erase/Re-format: All drives
Audio
# Parameter Name Description Options
1 File Format Set recording to be mono or poly WAV files.
» Poly
• Mono
2 Sample Rate The sample rate of recorded .wav files
• 44.1 kHz
• 47.952k
• 47.952kF
» 48k
• 48.048k
• 48.048kF
• 88.2k
• 96k
3 Bit Depth The bit depth of recorded .wav files
• 16-bits
» 24-bits
4 Pre-Roll Time
The amount of pre-record buffer. 0-10 seconds in 1
second increments.
» 2 secs
(0-10 seconds)
5 Input Gain Linking
When Input Gain is linked, adjusting an Input’s gain
adjusts all Input Gains by the same amount. Any
offsets at the time of linking are maintained.
» Off
• On
6 Input Delay Linking
When Input Delay is linked, adjusting an Input’s delay
adjusts all Input delays by the same amount. Any
offsets at the time of linking are maintained.
» Off
• On
7 MADI Input
Select MADI input source (optical or BNC). Auto-
Detect will detect which source is connected and
automatically choose that port. When there is signal
on both sources, the Optical source is used.
» Auto-Detect
• BNC
• Optical
8 MADI Equalizer
Select this option to turn off the MADI equalizer in
cases where MADI is not functioning correctly with an
external MADI device, such as long cable runs.
» On
• Off
9 HP Source
Choose the source for Headphone output and the 2
channel meters on the Main View.
• Odd / Even channel pairs (1,2 to
63,64)
• All tracks summed - mono
» All tracks summed - stereo
10 Line Ouput
Sub-menu. Choose output source for each line output
(1-8)
• Track 1 - Track 64 (per output)
» Track 1-8 (per output)