Sound Devices 970 - Manual (Page 38)

970 User Guide
v. 2.10 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
32
Ext
er
nal Contr
ol
with an HTTP connection using a web browser. The interface is designed for use with current ver-
sions of Chrome and Safari.
PIXNET only supports a single client (browser) connection to a 970 at one time. Accessing PIXNET
on a single 970 from multiple clients simultaneously is not supported. Control access to 970 units with
Setup Menu option
[Network - Authentication] .
The 970’s web IP address must be determined before accessing PIXNET:
1. Make sure that the 970 is powered on and connected to a network or directly to a computer
via one of the rear panel Ethernet connectors.
2. The 970 must have a unique name when controlling multiple 970 units via PIXNET. Verify
that the 970 has a unique name in [Network - This 970’s Name].
3. The 970 can automatically find a unique IP Address when
[Network - Auto IP Settings] is set to On. This is the recommended method for set-
ting up IP connections on the 970. If needed, the IP settings can be manually entered. To
manually enter IP settings, set [Network - Auto IP Settings] to Off. Then manually en-
ter [Network - IP Address - Subnet Mask -Gateway] values.
4. PIXNET supports connection to a single client. Control access to the 970 by configuring a user
name and password from Setup Menu option [Network - Authentication].
5. Open the web browser and enter the IP address displayed on the 970 Main View or listed in
[Network - IP Address] into the web browser’s address bar. Enter the credentials supplied in
step 4 when prompted.