Right panel connectors and controls – Sound Devices 702 User Manual
Page 15
702 User Guide and Technical Information
13
Right Panel Connectors and Controls
702
1
3
2
4
5
7
6
1)
AES3id Input
Unbalanced digital input accepta two
channel AES3 (or S/PDIF) on BNC con-
nectors. Supports sample rates up to 200
kHz.
2)
FireWire (IEEE-1394) Port
Connection to a computer (Mac OS,
Windows 2k/XP, Vista, Linux) to access
the CompactFlash volume as a mass
storage devices. Also used to attach
external FAT32-formatted FireWire
drives to the 702 for direct recording and
copying.
3)
C. Link In/Out Ports
RS-232 protocol interface on 6-pin
modular (“RJ-12”) connector for link-
ing multiple 7-Series recorders together.
Word clock and machine transport are
over C. Link.
4)
External DC In
Accepts sources of 10–18 volts DC for
unit powering and removable Li-ion
battery charging. The Hirose 4-pin con-
nector is wired pin-1 negative (
-
), pin-4
positive (+). Pin-2 (
-
) and pin-3 (+) are
used to charge the removable Li-ion
battery. DC ground at both pins-1 and
2 is at the same potential as chassis and
signal ground.
5)
Word Clock Input and Out
Provides clock input and output for the
702. Word input accepts sample rates
between 32 kHz and 192 kHz. Word
clock output is the rate that box is run-
ning. There is no sample rate conversion
utility in the 702.
6)
AES3id Output
Unbalanced digital output, two-channel,
for Output Bus 2. Signal source is menu-
selected.
7)
Rotary Switch
When in the Setup Menu, the Rotary
Switch moves among menu items; push
to enter a selection or to enter data. In
record and playback modes, rotate to
select headphone monitor source; push
action is user selectable.