Sound Devices 702 - Manual (Page 64)

702 User Guide and Technical Information
62
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
# Setup Name Setup Description Setup Options
39 File: Copy Files Allows the user to select a file or a range of
files to be copied from one storage media to
another. Files will only be copied from their
current directory to a directory of the same
name on the other media. If a file will not fit on
the destination media, user is given the option
to skip that file and continue with the copy or
abort the copy all together. User is advised at
the end of the copy process how many files
were copied successfully.
• Copy all {drive}  {drive}
• Last 24 hr {drive}  {drive}
• Last 48 hr {drive}  {drive}
• Flagged {drive}  {drive}
All files, when recorded, automatically have their flag
bit set to “on”
40 File: Copy Flag Reset Selects whether the flag bit is cleared or not
on files copied from one media to another.
• Disabled
• Enabled
41 Time Counter: Display Sets the numbers of the large numerical
display.
• Big A-time
• Big 24 hour time
42 Time Counter: Mode When set to 24 hour, the time counter is
displayed on the main LCD display. The time
counter value is derived from the 722 time
of date clock. Recorded files are stamped in
metadata according to that value.
• Off
• 24 hour
43
44
Output 1 Left: Source
Output 1 Right: Source
Selects the signal source for the Master Out-
put Bus (TA3 Outputs and Tape Outputs).
• Input 1
• Input 2
• Track A
• Track B
• Input 1+2
• Track A+B
45 Output 1 L,R: Attenuation Selects the attenuation level of signal sent to
the Master Output Bus.
Selectable from 0 to -40 dBFS
46
47
Output 2 Left: Source
Output 2 Right: Source
Selects the signal source for output bus 2 sent
to digital output bus 2.
• Input 1
• Input 2
• Track A
• Track B
• Input 1+2
• Track A+B
48 Output 2 L,R: Attenuation Selects the attenuation level of the signal
output to bus 2.
Selectable from 0 to –40 dBFS
49 Digital Output: Mode Selects whether or not the consumer SPDIF
bit is applied or not in the AES3id output.
• Consumer
• Professional
50 Play: AutoPlay Mode Allows user to play file(s) consecutively
from selected directory, one time through or
continuously.
Great for playing an MP3 collection during
down time!
• Disabled
• Play all
• Repeat one
• Repeat all
51 Time/Date: 12/24 Hr Selects between 12 hour and 24 hour time. • 12 hr
• 24 hr
52 Time/Date: Date Format Selects the date syntax of the recorder. • mm/dd/yy
• dd/mm/yy
53 Time/Date: Set Sets the internal date and time of the 702.
Resetting the time re-jams the internal time
code generator to the set time. Setting the
internal clock during a production day will
require time code devices to be re-jammed.
<time, date>
Clock is not set until <done> is selected
54 LCD: Contrast Adjusts the contrast level of the LCD display. 0–100%
55 LCD: Gain Display Sets the Main LCD Display to show the gain
values of inputs 1 and 2 always or to show Bit
Depth and Sample Rate and Gain of input 1
and 2 only when attenuated.
• Bit Depth, SR & Gain
• Gain Only