Sound Devices 702 - Manual (Page 61)

702 User Guide and Technical Information
59
702 Presets Factory Preset
Film
Preset
Reporter
Preset
Music
Preset
EXHDD: Empty Trash Empty Trash Empty Trash Empty Trash Empty Trash
Power: Ext Low Batt Volt 11.0 volts 11.0 volts 11.0 volts 11.0 volts
Power: Ext Power Function Do Nothing Do Nothing Do Nothing Do Nothing
Power: Power-up Messages Enabled Enabled Enabled Enabled
Ext Keyboard: Assign
F1 > Record
F2 > Stop Button
F5 > Rewind Button
F6 > Play Button
F7 > Fast Forward Button
CTRL + C > File: Copy Files
Last 24Hr CF > EXHDD F1 > Record
F2 > Stop Button
F5 > Rewind Button
F6 > Play Button
F7 > Fast Forward Button
CTRL + C > File: Copy Files
Last 24Hr CF > EXHDD F1 > Record
F2 > Stop Button
F5 > Rewind Button
F6 > Play Button
F7 > Fast Forward Button
CTRL + C > File: Copy Files
Last 24Hr CF > EXHDD F1 > Record
F2 > Stop Button
F5 > Rewind Button
F6 > Play Button
F7 > Fast Forward Button
CTRL + C > File: Copy Files
Last 24Hr CF > EXHDD
Ext Keyboard: Langauge English English English English
CL-1: Re-Program CL-1 Module CL-1 Module CL-1 Module CL-1 Module
CL-1: Logic Out Assign (Undefined) (Undefined) (Undefined) (Undefined)
User Setup Data File
All of the set parameters in the table above can be saved to a date file on the CompactFlash card. By
entering the Get/Save Setup Menu, the user can save or restore parameters to and from this data file.
This binary file is named 702.SUP and is saved in SOUNDDEV folder on the CompactFlash card
Setup Menu
The chart below describes the available setting for the 702. .
# Setup Name Setup Description Setup Options
1 Quick Setup Allows the user to quickly apply default menu
setups and save/retrieve user setups to disk
or CF.
• Load Factory Settings
- restores the factory default settings
• Load Film Settings
- applies typical setups for film production
• Load Reporter Settings
- applies typical setups for voice recording
• Load Music Settings
- applies typical setups for music recording
• Load User from CF
- applies settings saved by user to CF
• Save User to CF
- saves present state to file on CF
2 FireWire: Connection Activates FireWire drive mode. • Computer/Connect (STOP+HDD buttons)
• External Drive
3 Rec: Sample Rate Sets the audio sampling frequency of the 702 • 32 kHz
• 44.1 kHz
• 47.952 kHz
• 47.952k F
• 48 kHz
• 48.048 kHz
• 48.048k F • 88.2 kHz
• 96 kHz
• 96.096 kHz
• 96.096 k F
• 176.4 kHz
• 192 kHz
4 Rec: Bit Depth Sets the bit depth of the 702 recordings. • 16 bit,
• 24 bit