Triton TTS 1400 - Manual (Page 11)

11
GB
Angle Guide (TTSAG)
• Provides a range of
set angles +/- 55°
for guaranteed
precision cutting
• Unique double scale
feature enables a full
range of angles to
either side of 90°
1. Thread the angle guide into
the lower clamp channel (on
the underside of the track)
and loosely secure with the
hex screw supplied.
2. With the straight edge of
the angle guide against
the edge of the workpiece,
rotate the track until the
edge of the track is aligned
with the angle (marked on
the angle guide) that
you require
3. Tighten the hex screw to secure the angle guide in
position at the angle required
Note: The angle guide takes up 140–220mm / 5 1 ⁄
2
- 8 2 ⁄
3
"
of track length
Parallel Guide (TTSPG)
• In certain circumstances it
may not be possible to use
the track. In such cases
the saw can be used with
the Parallel Cutting Guide.
This enables accurate cuts
parallel to the edge of the
workpiece without use of
the track
• The parallel cutting guide
can be used on the left or
the right of the blade
1. Loosen the front and rear
Parallel Guide Clamps
(8 and 16) on the saw
2. Slide the parallel guide into
the mounting slots in the
saw baseplate
3. Use the scale on the guide to set the distance from the
blade to achieve the required width of cut
4. Re-tighten both the parallel guide clamps to secure the
parallel guide in position
Triton Dust Extraction System (TTSDES)
• For a cleaner, safer working
environment, the Triton Dust
Collection Bag TTSDES is
designed for use with the
Triton Plunge Track Saw
• This semi-rigid bag has a
1000ml capacity and will
collect over 90% of the dust
from the cut
• The non-woven material ensures a high filtering
capacity and a vision panel makes it is easy to see
when the bag needs emptying
• For optimum efficiency, do not allow the bag to become
more than ¾ full before emptying
• The Dust Collection Bag (TTSDES) simply push-fits
onto the Dust Extraction Port (3)
T riton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to
be defective due to faulty materials or workmanship
within 3 YEARS from the date of original purchase,
Triton will repair, or at its discretion replace, the
faulty part free of charge.
This guarantee does not apply to commercial use
nor does it extend to normal wear and tear or
damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not be made available to any third party.
PURCHASE RECORD
Date of Purchase: ___ / ___ / ____
Model: TTS1400
Serial Number: __________________
Retain your receipt as proof of purchase
WARRANTY
Using the Optional Accessories / Warranty
950638_Z1MANPRO1_additional AU text.indd 11 27/08/2014 11:34