Tweco CutMaster 12mm - Manual (Page 17)

CUTMASTER 12mm
Manual 0-5076 INTRODUCTION 2-3
2.05 Input Wiring Specifications
CutMaster 12mm Power Supply Input Cable Wiring Requirements
Input voltage Freq Power Input Suggested Sizes
Volts Hz kVA I max I eff Fuse (amps)
Flexible Cord
(AWG)
3 Phase
380 50/60 5.3 8 5 10 16
400 50/60 5.3 8 5 10 16
Line Voltages with Suggested Circuit Protection and Wire Sizes
Based on National Electric Code and Canadian Electric Code
NOTE
Refer to Local and National Codes or local authority having jurisdiction for proper wiring requirements.
Cable size is de-rated based on the Duty Cycle of the equipment.