Tweco Max 300 w-TD-750 - Manual (Page 24)

OPERATION 18 Manual 0-2557
The torch parts installed from the factory are as follows:
• Long Shield Cup (Catalog # 9-6412)
• Cutting Tip (Catalog # 9-6058)
• Electrode (Catalog # 9-6078)
• Gas Distributor (Catalog # 9-6081)
Refer to Figure 4-1 for the various torch parts.
CAUTION
Do not interchange parts. Make sure both the tip
and electrode in the torch correspond with the
plasma and secondary in use and the type of op-
eration (cutting or gouging).
A-01112
Cutting Electrode Air/Oxygen
Catalog No. 20-0010
Cutting Tip Air/N2
.052" Orifice, 70 amps
Catalog No. 9-6424
Oxygen Long Shield Cup
Standoff Cutting Only
Catalog No. 9-6411*
Gouging Shield Cup
Gouging Only
Catalog No. 9-6413
Short Shield Cup
Standoff Cutting Only
Catalog No. 9-6415
Cutting Tip Air/N2
.059" Orifice, 105 amps
Catalog No. 9-6425
Gouging Tip Air/ArH2
.110" Orifice
Catalog No. 9-6067
Gouging Tip Air/ArH2
.156" Orifice
Catalog No. 9-6069
Gouging Electrode, ArH2
Catalog No. 9-6131
Gouging Electrode
Air/N2/O2
Catalog No. 9-6130
Cutting Electrode, ArH2
Catalog No. 9-6427
Gas Distributor - Cutting
0.712" (18 mm) Length
Catalog No. 9-6416
Gas Distributor - Gouging
0.912" (23 mm) Length
Catalog No. 9-6082
Gouging Tip Air/ArH2
.125" Orifice
Catalog No. 9-6068
Cutting Tip Air/N2
.067" Orifice, 140 amps
Catalog No. 9-6426
Cutting Tip Oxygen
.052" Orifice, 70 amps
Catalog No. 9-6419
Cutting Tip Oxygen
.059" Orifice, 105 amps
Catalog No. 9-6420
Cutting Tip Oxygen
.067" Orifice, 140 amps
Catalog No. 9-6421
Gouging Tip Air/ArH2
.171" Orifice
Catalog No. 9-6070
Cutting Tip ArH2
.052" Orifice, 70 amps
Catalog No. 9-6428
Cutting Tip A/H2
.059" Orifice, 105 amps
Catalog No. 9-6429
Cutting Tip ArH2
.070" Orifice, 140 amps
Catalog No. 9-6430
Cutting Electrode Nitrogen
Catalog No. 9-6129
Water Tube Extension - Gouging
3.5" (90 mm) Length
Catalog No. 9-6132
Air Long Shield Cup
Standoff Cutting Only
Catalog No. 9-6412*
* - Licensed under U.S. Patent Nos. 5,120,930 and 5,132,512
Figure 4-1 Various Torch Parts Selection