Tweco 150 Ultra-Cut - Manual (Page 50)

Manual No. 0-4800 3-28 INSTALLATION
4. Use pre-drilled holes in at least two of the feet on the bottom of the Arc Starter to secure the Arc Starter to the
mounting surface.
Art # A-04749
Minimum 2
Input Connections
1. Refer to the illustrations. Make the following input connections to the Arc Starter.
• Coolant Supply and Return Hoses (from power supply). Hoses and connectors are color-coded; Red
for Return, Green for Supply.
Coolant Supply and Return Hoses
(from power supply)
Art # A-04750