Ultra-cut 300 xt – Tweco 300 XT Ultra-Cut Plasma Cutting System With Automated Gas Control User Manual
Page 60
Advertising
ULTRA-CUT 300 XT
3-3�
INSTALLATION
Manual 0-5305
*Negative (Master)
Torch Lead
Pilot
Art # A-12063_AB
*Negative (Slave)
Negative Master, Negative Slave and Pilot Cables (from Power Supply )
Art # A-12064
Control Cable from Power Supply rear panel
Output Connections
1. Refer to the illustrations. Make the following output connections to the Arc Starter.
Advertising