Section 2: introduction, 01 how to use this manual, 02 equipment identifi cation – Tweco 6045 Excel Arc User Manual

Page 15: 03 receipt of equipment, Introduction excel arc 6045

Advertising
background image

INTRODUCTION EXCEL

ARC

6045

August 26, 2011

2-1

Manual 0-5213

SECTION 2:

INTRODUCTION

2.02 Equipment

Identifi cation

The unit’s identifi cation number (specifi cation or part
number), model, and serial number usually appear on a
nameplate attached to the control panel. In some cases, the
nameplate may be attached to the rear panel. Equipment
which does not have a control panel such as gun and cable
assemblies is identifi ed only by the specifi cation or part
number printed on the shipping container. Record these
numbers on the bottom of page i for future reference.

2.03 Receipt Of Equipment

When you receive the equipment, check it against the
invoice to make sure it is complete and inspect the
equipment for possible damage due to shipping. If there is
any damage, notify the carrier immediately to fi le a claim.
Furnish complete information concerning damage claims
or shipping errors to the location in your area listed in the
inside back cover of this manual.

Include all equipment identifi cation numbers as described
above along with a full description of the parts in error.

Move the equipment to the installation site before
un-crating the unit. Use care to avoid damaging the
equipment when using bars, hammers, etc., to un-crate
the unit.

2.01 How To Use This Manual

This manual applies to just specifi cation or part numbers
listed on page i.

To ensure safe operation, read the entire manual, including
the chapter on safety instructions and warnings.

Throughout this manual, the words WARNING,
CAUTION
, and NOTE may appear. Pay particular attention
to the information provided under these headings. These
special annotations are easily recognized as follows:

!

WARNING

A WARNING gives information regarding
possible personal injury.

CAUTION

A CAUTION refers to possible equipment
damage.

NOTE

A NOTE offers helpful information concerning
certain operating procedures.

Additional copies of this manual may be purchased
by contacting Thermal Arc at the address and phone
number for your location listed in the inside back cover
of this manual. Include the Owner’s Manual number and
equipment identifi cation numbers.

Electronic copies of this manual can also be downloaded at
no charge in Acrobat PDF format by going to the Thermal
Arc web site listed below and clicking on the Literature
Library link:

www.thermadyne.com/thermalarc

Advertising