Tweco 6045 Excel Arc - Manual (Page 17)

INTRODUCTION EXCEL ARC 6045
August 26, 2011 2-3 Manual 0-5213
2.05 Features
1. Auxiliary power receptacles.
a. 1 x 19 pin (MS Compatible) with 115V 8-amp/42V 8-amp/24V 8-amp auxiliary power for wirefeeders, tractor
and SAW accessories.
b. 2 x 115V @ 20A.
2. Circuit breaker protection for 115V, 42V, 24V.
3. Simple, easy to operate front control panel.
4. Access to control PCB via the front panel control cover.
5. Front panel ON/OFF switch and pilot light.
6. Contactor ON switch for voltage sensing wire feeders.
7. Multi-process switch for GTAW, SMAW/CAG, GMAW/FCAW.
8. Large meter amps / volts + Memory holds for 20 seconds.
9. All user interfaces accessed from front of unit.
10. Line voltage compensation.
11. Fan turns ON when the arc is established and stays on for 10-15 minutes after it is extinguished.
12. Windings and rectifi ers protected against moisture and corrosive environments.
13. Thermal overload protection / Temperature shutdown light.
14. Circuit protection - In the event of a mains power failure machine defaults to OFF.
15. Accessories:
a. Remote output control
b. Control cable adapters
c. Hour meter