Section 3:sp 4000w mounting instructions, 01 remove original pc-board, Section 3 – Tweco SP SERIE PowerMaster User Manual
Page 19: Sp 4000w mounting instructions -1, 01 remove original pc-board -1, Push pull interface kit
Advertising
3-1
July 7, 2008
Push Pull Interface KIt
SECTION 3:
SP 4000W MOUNTING INSTRUCTIONS
3.01 Remove Original PC-Board
CAUTION
Pull the mains plug before opening the machine.
A. Remove the right side casing cover to access the original PC-board by unscrewing the 7 Phillips-head
mounting screws that hold the cover in place. Refer to Figure 3-1.
Figure 3-1: Access Original PC-Board
B. Disconnect all connectors from the original PC-board and mark them with the appropriate board connector
designations. Refer to Section 2.06.
CAUTION
Be aware of the potential danger of polarity reversal.
C. Remove the original PC-board from its spacers and dispose it in an environmentally responsible fashion.
Advertising