Tweco FP-55 - Manual (Page 26)

OPERATION 4-4 Manual 0-2846
12. Gas will flow for 10 seconds (post-flow).
a. Gas solenoid closes. Gas flow stops. GAS indi-
cator turns OFF.
13. Place the ON/OFF power switch on the front panel
of the unit to OFF.
a. AC Power indicator turns OFF. Fan turns OFF.
14. Place the main power disconnect to open.
a. Main AC power is removed from the system.
NOTE
For information on cutting techniques, cutting
problems, cutting speeds, cut quality, etc., refer to
the torch manual supplied with the torch.
This completes the Operation Section.