VICI Two position Standard electric User Manual
Page 2
Table of Contents
2. MANUAL USE OF THE 2 POSITION VALVE ACTUATOR..............................2
3. CONTROLLING THE ACTUATOR WITH A COMPUTER................................3
3.1 Using a Relay Output
3.2 Using a Logic Level Output
3.3 Using the Output from the Actuator
3.31 Inject Contact Closure
3.32 Positive Position Feedback
4. INSTALLING A VALVE ON AN ACTUATOR....................................................5
4.1 Preparing a Manual Valco Valve for Mounting on an Actuator
4.11 Disassembly of a Manual W or UW Type Valve
4.12 Removing the Handle or Knob from a Valve on a Standoff
4.13 Removing the Handle from a P Type Valve
4.14 Removing the Handle from a U Type Valve
4.2 Installation of a Valve With Closemount Hardware
4.3 Installation of a Valve With a Standoff
5.1 Visually Checking the Alignment
5.2 Chromatographic Symptoms of Misalignment
5.21 Loss of Flow or Blocked Flow
5.22 Multiple Peaks or Doublets
5.3 Causes of Misalignment
5.31 Removal of the Valve from the Actuator for Mounting
5.32 Shock from Heavy or Continuous Use
5.4 Alignment Procedure
6. ACTUATOR MODIFICATIONS .......................................................................14
6.1 Adjusting the Actuator Stroke
6.2 Actuator Conversion
6.21 Disassembly
6.22 Installation of the New Crank Assembly
6.23 Flag Adjustment