Vixen SPHINX SXD Mount - Manual (Page 54)

Page 55
How to Update your STARBOOK
CAUTION!
- Please use new batteries, an AC Adapter or a constant voltage power supply for the
STARBOOK for the update. For data transfer make sure that you have a stable power
supply for your PC. You may fail to reboot the STARBOOK if the power supply is turned
off during the update. In that case, ask your local Vixen dealer for repair (It is chargeable
to you). All your data stored in the STARBOOK may be lost after repair.
- You may have to alter the network settings in your PC for the update. Please record the
original settings in the PC before changing them for the update.
- The data of your observing location stored in the STARBOOK may be changed as a result
of the update. You should write down your current settings before you start to update.
EXEMPTION
- Vixen Co., Ltd and Vixen’s international distributors assume no liability whatsoever for
any damage caused by using or installing this update. Installation and use are at the
customer’s risk, unless Vixen Co., Ltd. and Vixen’s international distributors recognize a
defect in the software.
Requirements
Operating System
Microsoft Windows® 98Second Edition
Microsoft Windows® Me
Windows® XP Home Edition / Windows® XP
Professional
Web Browser Internet Explorer 5.0 or over
CPU Pentium® II 400MHz or better
RAM 128MB or more, but 256MB or more for Windows® XP
LAN 10BASE-T/100BASE-T
Procedures for one to one connection
These procedures are for a one to one connection between the STARBOOK and a PC.
When you connect the STARBOOK-S to LAN or a router, refer to page 56.
Requirements
1 STARBOOK controller
2 Power Supply for STARBOOK
3 PC (Computer) for data transfer (Ethernet Card on PC)
4 LAN crossover cable